Washed Sand for Patios in Denton, TX

Texas Rock Supply handles gravel and aggregate delivery in Denton, TX for both contractors and homeowners. You might be laying a paver patio, topping a driveway, or building a bed. We stock Flex Base by its local name, along with stone, sand, and soil for every phase of the job. The expansive clay across the Blackland Prairie moves with the seasons, so choosing the right base and bedding material matters from the start.

Materials for Denton Projects

Patio work in Denton starts with what sits under the pavers. Stone screenings are a common choice for bedding material because they compact into a firm, level surface that locks pavers in place. For the base layer below that, Flex Base is the default material. Contractors here call it by that name, and it handles the clay movement better than a thinner gravel layer would.

For drainage around the patio edge or under a walkway, #57 limestone moves water quickly and stays open. If you need a finer washed stone for paver joints or a tight bed, #8 crushed stone works well. When the patio ties into a dry creek bed or a decorative border, Texas River Rock adds a finished look that fits the local landscape.

Ground and Conditions in Denton

The expansive clay across the Blackland Prairie and much of north and central Texas shrinks and swells with the season. That movement is what cracks a thin patio base or heaves a walkway. The fix is depth: a thicker compacted base spreads the load and gives the clay less room to push through. Heavy downpours and flash flooding on the Gulf Coast side of the state test your drainage, so a clear stone layer under the patio keeps water moving away from the slab.

Work runs year round in most of Texas; wet spells, not cold, are what stop a base job. Frost depth is minimal in most of the state, so base failures here come from water and clay movement, not frost. That means you can lay a patio in January if the ground is dry, but you need to wait out a rainy stretch to get a proper compaction.

Delivery to Denton and the Surrounding Area

Ordering bulk material for a Denton project starts with a simple choice: tons or yards. You estimate the square footage of your patio and the depth of the base and bedding layers, then convert that to a volume. Most contractors order by the ton for gravel and stone, while soil and mulch are often ordered by the yard. Texas Rock Supply delivers across Denton County, including nearby Argyle, Aubrey, and Flower Mound.

When you order online, your material arrives on a truck sized for your quantity. A full load for a large patio job differs from a smaller delivery for a walkway, and the driver will need a clear spot to dump or spread the material. Plan for access to your yard so the delivery goes smooth.

What gravel is best for a driveway in Denton?

For a driveway in Denton, start with a base of Flex Base compacted in lifts to handle the clay movement. Top it with a surface layer of Driveway Gravel for a stable, drivable finish. The Flex Base gives you the strength, and the surface gravel protects it from wear and keeps dust down.

How much material will my project need?

Measure the length and width of your project area in feet, then multiply by the depth in feet to get cubic feet. Divide that by 27 to find cubic yards, or use our online calculator to convert that to tons for gravel and stone. A patio base at 4 inches deep needs about one ton of Flex Base per 100 square feet, but the calculator gives you a precise figure for your exact dimensions.

Plan Your Denton Patio Base

Use the material calculator on our site to match your patio size to the right quantity of screenings and base stone. Getting the depth right the first time saves you from a second delivery and a redo. When you know your numbers, place your order for Flex Base or bedding stone and we will bring it to your Denton site.