Bulk Gravel Delivery to Lewisville, TX

Texas Rock Supply handles gravel and aggregate delivery in Lewisville, TX for both contractors and homeowners. You need materials that can handle the expansive clay under the Blackland Prairie. Flex Base is the local standard for building a stable base that will not shift with the season.

Materials for Lewisville Projects

Patio and flatwork projects in Lewisville demand a proper bedding layer under pavers. The right stone locks together when compacted, so your surface stays level through heavy use and wet weather.

Start with a compacted layer of Flex Base for the foundation. Over that, use 3/8". Crushed Stone as a leveling bed for pavers. The angular edges lock together so the pavers do not settle unevenly.

For sand-set joints between pavers, Stone Screenings work well. They sweep into the gaps and harden into place. Around the patio edge, #57 Limestone provides drainage in the base layer that pulls water away from the flatwork.

Ground and Conditions in Lewisville

Expansive clay across the Blackland Prairie and much of north and central Texas shrinks and swells with the season, which is why base depth and drainage carry the job. A thin base on this clay will crack and heave when the ground moves. The fix is a proper base depth, usually 4 to 6 inches of compacted Flex Base, so the load spreads across the clay instead of concentrating in one spot.

Heavy downpours, flash flooding, and tropical rainfall on the Gulf Coast put water under your flatwork. A drainage layer of #57 Limestone or Drain Rock below the base carries that water away before it softens the clay.

Work runs year round in most of Texas; wet spells, not cold, are what stop a base job. Frost depth is minimal in most of the state, so base failures here come from water and clay movement, not frost. Plan your patio pour around the dry months and you avoid the delays that wet clay causes.

Delivery to Lewisville and the Surrounding Area

Ordering bulk material for your Lewisville project starts with deciding between tons and cubic yards. The right choice depends on what you are building. A patio base is measured in tons, since you are compacting it into a dense layer. Play sand or topsoil for a lawn is measured in yards, since you are spreading it loose.

Use the volume calculator on each product page to estimate your quantity. Measure the length and width of your area, then multiply by the depth you need. For a compacted base, add about 25 percent for the material that compacts down.

Texas Rock Supply delivers across Denton County, including Argyle, Aubrey, Carrollton, Dallas, and Denton. When your load arrives, have a clear drop spot that a truck can reach. We deliver by the ton or yard, sized to what your project actually needs.

What gravel is best for a driveway in Lewisville?

Flex Base is the best choice for a Lewisville driveway. It compacts into a hard, stable surface that holds up under vehicle weight. Spread it in layers of 4 to 6 inches and compact each one. For a top layer that is easier to walk on, add Driveway Gravel over the compacted Flex Base.

How much material will my project need?

Measure your project area in square feet, then multiply by the depth in feet. Divide that number by 27 to get cubic yards. For compacted base material, add roughly 25 percent to account for settling. A 10 by 10 foot patio at 4 inches deep needs about 1.3 cubic yards of stone before compaction.

Order Your Lewisville Materials Today

Check the product pages for the volume calculator and order the right amount for your patio, driveway, or drainage project. Texas Rock Supply delivers Flex Base, crushed stone, and sand to Lewisville and the surrounding Denton County area. Place your order online and get your materials delivered to your site.