Washed Sand for Patios in Tilden, TX
Planning gravel and aggregate delivery in Tilden, TX for a new patio or walkway? Texas Rock Supply has the bedding material you need to set pavers and flagstone on a stable, level bed. Flex Base is the local workhorse for the compacted sub-base underneath, but the top few inches of bedding call for a cleaner, finer stone. That is where 3/8 inch crushed stone earns its place on the job.
Getting the bedding layer right matters here. Expansive clay across the Blackland Prairie and much of north and central Texas shrinks and swells with the season, which is why base depth and drainage carry the job.
Materials for Tilden Projects
For paver and flatwork bedding, you need a stone that locks together without shifting underfoot. 3/8 inch crushed stone is the right call for that top layer. It is small enough to screed flat, yet angular enough to hold pavers in place. Use it directly under the pavers, over a compacted base of Flex Base for the heavy lifting below.
Flex Base is the standard Texas base material. Contractors across McMullen County use it for driveways, pads, ranch roads and laydown yards. It compacts into a dense, stable layer that spreads the load and resists rutting. For a patio, lay and compact Flex Base first, then add your bedding stone on top.
Where drainage is a concern, drain rock handles the wet jobs. Run it in French drains, downspout runs and behind retaining walls to move water away from your slab or patio edge. Pair it with the right bedding and you keep moisture from pooling under your work.
For the joints between pavers, stone screenings sweep into the gaps and lock the surface together. They also work as a bedding layer for flagstone on a sand or gravel bed. Keep a bag on hand for the final pass on any flatwork job.
Ground and Conditions in Tilden
The ground around Tilden does not stay still. Expansive clay shrinks and swells as it dries out and wets back up, and that movement is what cracks thin slabs and shifts paver patios. The fix is simple: build a base thick enough to bridge the movement, and give the water a way out.
Heavy downpours, flash flooding, and tropical rainfall on the Gulf Coast put that drainage to the test. Water that sits under a patio or against a foundation will soften the subgrade and start the clay moving. A proper base depth, a slight slope on the finished surface, and a drainage layer around the edges carry the job through the wet months.
Work runs year round in most of Texas; wet spells, not cold, are what stop a base job. Plan your pour and your base work around the forecast, and you can build in any season. Frost is not the enemy here. Base failures in Tilden come from water and clay movement, not frost, so spend your effort on compaction and drainage, not freeze protection.
Delivery to Tilden and the Surrounding Area
Ordering bulk material for a patio job in Tilden starts with the quantity. You can order by the ton or by the cubic yard, and the right choice depends on how you measure your project. Most base and bedding jobs are figured in yards, while some contractors prefer tons for ordering simplicity.
Texas Rock Supply delivers bulk material by the truckload to job sites across Tilden and McMullen County, including runs out toward Calliham. When you order online, you pick your material and your quantity, and the load shows up ready to spread. Have your site ready for the truck, with clear access and a level spot for the driver to dump.
Before you order, measure your project area and figure your depth. That gives you the yards you need, and our team can help confirm your math when you place the order.
What gravel is best for a driveway in Tilden?
Start with Flex Base as your compacted base layer. It packs into a dense surface that stands up to truck traffic and ranch use. For a top dressing over that base, driveway gravel gives a cleaner finish that sheds water and stays put. In Tilden, go deeper on the base to handle the clay movement beneath.
How much material will my project need?
Measure the length and width of your area in feet, then multiply by your depth in feet to get cubic feet. Divide that by 27 to get cubic yards. A patio that is 10 feet by 12 feet, with 4 inches of base and 1 inch of bedding, needs about 1.5 yards of base plus a half yard of bedding. When in doubt, round up slightly on the base layer.
Order Your Patio Materials for Tilden Delivery
Use the material calculator on our site to dial in your quantity before you order. It takes the guesswork out of figuring yards and tons for your Tilden project. When you are ready, place your order online and we will get your Flex Base and bedding stone scheduled for delivery.