Skip to main content
FREE Delivery!|(512) 412-3378

Montague County, Texas ยท Free Delivery

Bulk Aggregates for Patios in Montague, TX

Free delivery to Montague on every order, with loads arriving in as fast as 2 business days.

Delivering to Montague, TX

Free delivery on every order.

  • Free delivery to Montague
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Montague

Crushed gravel and base materials that compact under tires.

Flex Base

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Montague

Rock & Stone delivered to Montague

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Montague

Decorative delivered to Montague

Rounded stone for beds, borders and water features.

Sand delivered to Montague

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Montague

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Montague works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Montague.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Montague addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Plan your gravel and aggregate delivery in Montague, TX around the wet spells that stop outdoor work. Texas Rock Supply delivers Flex Base and other bulk materials by the ton, so you can schedule when the ground is ready. Most of the year, you can work outside, but heavy downpours and clay soil mean timing matters.

Get the base depth right before you set pavers or pour flatwork. Flex Base gives you a stable layer that holds up under traffic and shifting soil.

Materials for Montague Projects

For patios and walkways, the bedding layer under pavers does the real work. Start with a compacted base of Flex Base, the standard Texas material for driveways, pads, and laydown areas. It locks together when compacted, so your flatwork stays level.

Over that base, use stone screenings to bed the pavers. Screenings fill tight and give a smooth surface to set on. For drainage around the patio edge or under a footer, #57 limestone moves water away fast. If you need a finer washed stone for pipe bedding or tight joints, #89 crushed stone fits small gaps.

Ground and Conditions in Montague

Expansive clay across the Blackland Prairie and much of north and central Texas shrinks and swells with the season, which is why base depth and drainage carry the job. A thin base will crack and shift when the clay moves under it. The fix is a deeper base of Flex Base, compacted in lifts, so the patio rides on stable ground instead of moving soil.

Heavy downpours and flash flooding also test your drainage. Water that pools under pavers softens the base and leads to settling. Add a drainage layer of crushed stone below the base or along the edge to carry water away. Work runs year round in most of Texas; wet spells, not cold, are what stop a base job, so plan around the forecast.

Frost is minimal in most of the state, and base failures here come from water and clay movement, not frost. That means your focus goes to compaction and drainage, not freeze protection.

Delivery to Montague and the Surrounding Area

You order online in tons, and Texas Rock Supply delivers to your site in Montague. Estimating quantity comes down to a simple calculation: measure the length and width of the area, then multiply by the depth you need. A patio base of Flex Base at 4 inches deep takes more material than a 2-inch bedding layer of screenings, so check your numbers before you order.

Use the calculator on the product page to convert your square footage into tons. That keeps your delivery accurate and avoids a short load mid-project. Texas Rock Supply covers Montague County, including Bowie, Forestburg, Nocona, Ringgold, and Saint Jo. Bulk delivery means the material shows up ready to spread, so you can keep the job moving.

What gravel is best for a driveway in Montague?

Flex Base is the best choice for a driveway in Montague. It is the local standard for driveways, pads, and ranch roads because it compacts into a firm, durable surface. Spread it in layers, wet it down, and compact it for a drive that holds up to traffic and clay movement. For a finished top, add a layer of driveway gravel over the compacted base.

How much material will my project need?

Measure your project area in square feet, then decide the depth. Multiply the two to get cubic feet, then divide by 27 to find cubic yards. For example, a 10 by 10 foot patio at 4 inches deep needs about 1.2 cubic yards. Since most materials are sold by the ton, use the product calculator to convert yards to tons based on the material's weight.

Order Your Patio Base and Bedding Material

Get the base depth right, choose the bedding layer that suits your pavers, and schedule delivery around dry weather. Texas Rock Supply delivers Flex Base, screenings, and drainage stone by the ton to Montague. Check the quantity for your patio with the calculator, then place your order online for bulk delivery to your site.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Montague, TX

What gravel is best for a driveway in Montague?

Flex Base is the best choice for a driveway in Montague. It is the local standard for driveways, pads, and ranch roads because it compacts into a firm, durable surface. Spread it in layers, wet it down, and compact it for a drive that holds up to traffic and clay movement. For a finished top, add a layer of driveway gravel over the compacted base.

How much material will my project need?

Measure your project area in square feet, then decide the depth. Multiply the two to get cubic feet, then divide by 27 to find cubic yards. For example, a 10 by 10 foot patio at 4 inches deep needs about 1.2 cubic yards. Since most materials are sold by the ton, use the product calculator to convert yards to tons based on the material's weight.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.