Walkway Gravel for Pathways in Kermit, TX

For gravel and aggregate delivery in Kermit, TX, Texas Rock Supply brings bulk materials straight to your site. If you are laying a path or walkway, stone screenings and 3/8 inch crushed stone give you a surface that packs firm and sheds water. West Texas ground shifts with moisture, so the fines in these materials hold a path edge where loose gravel wanders.

Start with a compacted base of Flex Base. That base carries the load, then a top layer of finer stone keeps the walking surface level and stable.

Materials for Kermit Projects

Pathways need a material that locks together underfoot. Stone screenings are the fines left after crushing, and they pack into a smooth, hard surface. Spread them an inch or two over compacted Flex Base and roll it, and you get a walkway that handles foot traffic and a garden cart without rutting.

For drainage around a path edge or under flagstone, 3/8 inch crushed stone works as pipe bedding or a topping coat. Its smaller size fills gaps and locks tight without the sharp edges of larger rock. When you need a slightly bigger washed stone, #57 limestone gives you a clean, single-size aggregate for French drains or a bedding layer under a paver patio.

If the path runs through a low spot, put down drain rock first. It moves water away from the surface and keeps the base dry. On top of that, your screenings or 3/8 inch stone will stay put instead of working into mud.

Ground and Conditions in Kermit

Expansive clay across the Blackland Prairie and much of north and central Texas shrinks and swells with the season, which is why base depth and drainage carry the job. In Kermit, that means a thin path base will crack and shift when the ground moves. You need enough compacted base to ride over the clay, not fight it.

Heavy downpours and flash flooding can hit West Texas hard. Water running across a path will wash out fines and undercut the edge. A layer of drain rock or 3/8 inch crushed stone under the finished surface gives water a place to go, so it does not soften the base.

Work runs year round in most of Texas; wet spells, not cold, are what stop a base job. Frost is minimal in most of the state, and base failures here come from water and clay movement, not frost. Time your path job for a dry stretch, compact each lift, and it will hold through the seasons.

Delivery to Kermit and the Surrounding Area

Order online and choose your quantity by the ton or the cubic yard. For a path, measure the length and width in feet, multiply by the depth you plan, and that tells you the volume. If you are unsure, the product pages show coverage per ton to help you estimate before you order.

Bulk delivery to Kermit in Winkler County means a dump truck or end dump at your site. Have a clear spot for the driver to spread the load or pile it. We also serve nearby Wink in the same county, so material for a ranch road or laydown yard can come on the same run. Tell us the access when you order, and we will get the truck in and out clean.

What should I have ready when the truck arrives?

Clear the area where the driver will dump. Mark any low wires or gates, and make sure the ground is dry enough that the truck will not sink. Know where you want the pile, and have a skid steer or shovels ready to spread it. If you are laying a path, have the base prepped and compacted so the new material goes straight down.

What is the best base under pavers in Kermit?

Start with a compacted layer of Flex Base, the local crushed limestone mix, at least four inches deep. That gives you a firm, stable pad that handles the clay movement. On top, use stone screenings as your bedding layer. Screenings screed level and lock the pavers in place without washing out.

Plan Your Path and Order the Stone

Check the coverage calculator on each product page to match your yardage, then place your order for delivery to Kermit. Texas Rock Supply has the Flex Base, screenings, and 3/8 inch crushed stone you need to build a path that holds. Get your quantity figured and order today.