Skip to main content
FREE Delivery!|(512) 412-3378

Navarro County, Texas ยท Free Delivery

Bulk Gravel Delivery to Kerens, TX

Free delivery to Kerens on every order, with loads arriving in as fast as 2 business days.

Delivering to Kerens, TX

Free delivery on every order.

  • Free delivery to Kerens
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Kerens

Crushed gravel and base materials that compact under tires.

Flex Base

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Kerens

Rock & Stone delivered to Kerens

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Kerens

Decorative delivered to Kerens

Rounded stone for beds, borders and water features.

Sand delivered to Kerens

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Kerens

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Kerens works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Kerens.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Kerens addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Need gravel and aggregate delivery in Kerens, TX? Texas Rock Supply delivers bulk material straight to your site. Order Flex Base by the ton or yard for patios, drives, and pads. The expansive clay across the Blackland Prairie shifts with the seasons, so base depth and drainage carry every job. Get the right material, sized right, without leaving town.

Materials for Kerens Projects

Start with a solid bed under your pavers and flatwork. Flex Base, listed as Flex Base, is the local workhorse. It compacts into a firm, stable layer that holds up under patios and walkways. Spread it at a minimum depth of 2 inches, then compact it well. This base stops the clay below from working up into your surface.

For the bedding layer itself, use Stone Screenings. This fine material levels out smoothly under pavers and flagstone. It locks together without shifting, so your patio stays flat and even. Over time, screenings shed water instead of trapping it against the stone.

Add Washed Sand for joints and leveling. It sweeps cleanly into gaps between pavers and holds them firm. For drainage around the patio edge, run a line of Drain Rock. This stone moves water away fast, keeping the base dry through heavy rains.

Ground and Conditions in Kerens

The clay here is the problem. Expansive clay across the Blackland Prairie shrinks and swells with the season, and that movement cracks thin bases. A skimpy layer of rock will fail within a year. Build the base thick enough to bridge the movement, and it will hold.

Water is the second enemy. Heavy downpours and flash flooding hit this part of Texas hard. When clay gets wet, it turns soft and moves more. That is why a drainage layer under your patio matters as much as the base itself. Give water a path out, and the clay stays stable.

Work runs year round in most of Texas; wet spells, not cold, are what stop a base job. Frost depth is minimal, so base failures here come from water and clay movement, not frost. Time your pour for a dry stretch, and compact everything in lifts.

Delivery to Kerens and the Surrounding Area

Choose your quantity by the ton or by the yard. Estimating is straightforward. Measure the length and width of your patio in feet, multiply by the depth you need, and convert that volume to tons. When in doubt, round up. A short load stops the job mid-pour.

Texas Rock Supply delivers across Navarro County. We serve Kerens, Barry, Blooming Grove, Chatfield, Corsicana, and Dawson. Order online, pick your material, and we bring it to your driveway or job site. Bulk delivery means one load, no bags, no trips to the store.

Tell us the square footage when you order. That helps us confirm you have enough material to finish the job. For a typical patio, plan on about 1.5 tons of Flex Base for every 100 square feet at a 2-inch depth, plus a separate ton of screenings for bedding.

What gravel is best for a driveway in Kerens?

Flex Base is the standard choice. It compacts into a hard, stable surface that sheds water and holds up under vehicle weight. Spread it 4 to 6 inches deep, compact it in layers, and it will carry cars and trucks through wet weather. Top it with Driveway Gravel for a cleaner finish.

How much material will my project need?

Measure the area in square feet, then multiply by the depth in feet. Divide that by 27 to get cubic yards. For a 200-square-foot patio at 3 inches deep, you need about 1.9 cubic yards. Most base materials weigh roughly 1.4 tons per cubic yard, so order around 2.6 tons to be safe.

Order Your Material Today

Use the calculator on the product page to lock in your quantity. Pick Flex Base for the base layer, then add screenings for bedding. Order online, and Texas Rock Supply will deliver it to your site in Kerens. Get your patio project moving now.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Kerens, TX

What gravel is best for a driveway in Kerens?

Flex Base is the standard choice. It compacts into a hard, stable surface that sheds water and holds up under vehicle weight. Spread it 4 to 6 inches deep, compact it in layers, and it will carry cars and trucks through wet weather. Top it with Driveway Gravel for a cleaner finish.

How much material will my project need?

Measure the area in square feet, then multiply by the depth in feet. Divide that by 27 to get cubic yards. For a 200-square-foot patio at 3 inches deep, you need about 1.9 cubic yards. Most base materials weigh roughly 1.4 tons per cubic yard, so order around 2.6 tons to be safe.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.