Bulk Gravel Delivery to Harwood, TX

For gravel and aggregate delivery in Harwood, TX, Texas Rock Supply brings the materials local contractors and homeowners reach for first. We stock Flex Base for drives and pads, plus washed stone, sand and topsoil for the jobs that follow. Order online and we deliver to your site in Gonzales County.

Because the expansive clay across the Blackland Prairie shrinks and swells with the season, base depth and drainage carry the job. We help you choose the right depth and material the first time.

Materials for Harwood Projects

For paths and walkways in Harwood, the surface you walk on matters as much as what sits underneath. Stone screenings give you a firm, fine surface that packs down well for garden paths and paver bedding. For a slightly larger walkable top, 3/8 inch crushed stone spreads evenly and stays put. Both hold up through the wet season without turning to mud.

Underneath those surfaces, Flex Base is the default Texas base material. It compacts into a firm layer that resists the shifting clay beneath it. For a decorative path or a dry creek bed, Natural Pea Gravel offers a round, smooth option that moves less underfoot than angular stone.

Ground and Conditions in Harwood

The ground around Harwood is mostly expansive clay. It swells when wet and shrinks as it dries, which is why a thin base fails here. The fix is depth: a compacted layer of Flex Base at least 4 inches thick spreads the load and keeps the surface from rutting.

Heavy downpours and flash flooding are the real test for any base job. Water that sits under a driveway softens the clay and works the stone down into it. A crowned surface and a drainage layer of Drain Rock along the edge give water a path away from the base.

Work runs year round in most of Texas. Wet spells, not cold, are what stop a base job. Frost is minimal across most of the state, so base failures here come from water and clay movement, not frost. That means you can schedule your project for almost any month, as long as the ground is dry enough to compact properly.

Delivery to Harwood and the Surrounding Area

Ordering bulk material for delivery in Harwood starts with a quick estimate of how much you need. You can order by the ton for gravel and stone, or by the yard for soil and mulch. A simple way to gauge quantity: measure the length and width of your project area, then multiply by the depth you plan to reach.

When your order arrives, have the drop zone clear and within reach of the truck. We deliver across Gonzales County, including nearby Belmont, Cost, Gonzales, Leesville and Nixon. Tell us where you want the pile and we will handle the rest.

What should I have ready when the truck arrives?

Clear the area where you want the material dumped and make sure the truck can reach it without low branches or power lines overhead. If you are laying base, have the ground graded and any old surface removed beforehand. Knowing your quantity in tons or yards before the truck arrives keeps the job moving.

What is the best base under pavers in Harwood?

Start with a compacted layer of Flex Base at least 4 inches deep. That gives pavers a stable bed that will not shift with the clay underneath. Over the Flex Base, add a 1 inch layer of stone screenings to level the pavers and fill the joints. This combination handles the seasonal movement of Blackland Prairie clay.

Order Your Materials for Harwood Delivery

Use the quantity calculator on each product page to estimate your needs in tons or yards. When you know what your project calls for, place your order online and we will schedule delivery to your Harwood site. Get the right base and surface material on order today.