Washed Sand for Patios in Eagle Lake, TX

If you are laying a patio or setting pavers, you need gravel and aggregate delivery in Eagle Lake, TX that shows up with the right bedding material. Texas Rock Supply brings bulk loads to your site, from Flex Base for the sub-base to washed stone for the setting bed. This page covers what works on the expansive clay around here and what you should order for a flat, stable surface.

Materials for Eagle Lake Projects

Start with a sound base. Flex Base, listed on the site as Flex Base, is the default Texas base material. It compacts into a firm layer that spreads the load and keeps pavers from settling unevenly. For a patio, spread it at a minimum depth of 4 inches and compact it in lifts.

On top of that, use #57 Limestone as your bedding layer. This washed stone locks together and drains, so water moves through instead of pooling under your pavers. For a tighter setting bed, Stone Screenings level out to a smooth surface that holds pavers in place without shifting.

Where the patio meets the yard, 3/4 inch crushed stone works for edge drains, and RipRap handles runoff at the low side. Both manage the heavy downpours common on the Gulf Coast.

Ground and Conditions in Eagle Lake

Expansive clay across the Blackland Prairie and much of north and central Texas shrinks and swells with the season, which is why base depth and drainage carry the job. A thin base will crack or heave as the ground moves under it. You fix that by digging out soft clay and putting down a thick, compacted Flex Base layer that stays put.

Heavy downpours, flash flooding, and tropical rainfall on the Gulf Coast put water to work against your patio. Without a drainage layer, water sits under the pavers and softens the clay. A washed stone bed, like #57 limestone, gives water a path out so it does not undermine your work.

Work runs year round in most of Texas; wet spells, not cold, are what stop a base job. Frost depth is minimal in most of the state. Base failures here come from water and clay movement, not frost, so time your pour around dry weather and compact properly.

Delivery to Eagle Lake and the Surrounding Area

Order online and choose your quantity by the ton or by the yard. For a patio, measure the square footage and multiply by the depth to get your volume. A 10 by 12 foot patio at 4 inches deep takes about 1.5 yards of Flex Base. When you are not sure, call and we will help you figure the load.

Bulk delivery means a truck backs up to your site in Eagle Lake and dumps the material where you need it. We deliver across Colorado County, including runs to Alleyton, Altair, Columbus, Garwood, and Glidden. Have a clear spot for the drop and a way to move the material once it lands.

What gravel is best for a driveway in Eagle Lake?

Flex Base is the standard choice for driveways here. It compacts into a firm, all-weather surface that handles truck traffic and sheds water. Spread it at a minimum depth of 4 inches and compact it well. For a top coat over the base, Driveway Gravel gives a cleaner finish that is easier to walk on.

How much material will my project need?

Measure the length and width of your area in feet, then multiply by the depth in feet to get cubic feet. Divide by 27 to convert to cubic yards. A 20 by 30 foot driveway at 4 inches deep is 200 cubic feet, or about 7.4 yards. Use our quantity calculator online to check your numbers before you order.

Order Your Patio Base Today

Get the bedding material right and your patio will stay level through the wet seasons. Order Flex Base and #57 Limestone by the ton for delivery to your Eagle Lake site. Use the calculator to size your load, then place your order online with Texas Rock Supply.