Skip to main content
FREE Delivery!|(512) 412-3378

Dallam County, Texas ยท Free Delivery

Bulk Aggregates for Patios in Dalhart, TX

Free delivery to Dalhart on every order, with loads arriving in as fast as 2 business days.

Delivering to Dalhart, TX

Free delivery on every order.

  • Free delivery to Dalhart
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Dalhart

Crushed gravel and base materials that compact under tires.

Flex Base

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Dalhart

Rock & Stone delivered to Dalhart

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Dalhart

Decorative delivered to Dalhart

Rounded stone for beds, borders and water features.

Sand delivered to Dalhart

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Dalhart

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Dalhart works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Dalhart.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Dalhart addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

If you need gravel and aggregate delivery in Dalhart, TX, Texas Rock Supply brings bulk materials straight to your site. Local contractors and homeowners alike order Flex Base for pads and laydown areas, and the same material acts as a sturdy sub-base under patios. Because the ground here moves with the seasons, starting with the right depth of base is what keeps a flatwork job from shifting later.

Materials for Dalhart Projects

For patio work, the bedding layer under pavers or flatwork needs to be stable, level, and able to drain. Stone screenings are the usual choice for a paver bedding course. They lock together when compacted and give you a smooth surface to set pavers on without the sharp edges of larger stone.

Below that bedding layer, you want a compacted base that will not shift. Flex Base is the default Texas base material for this job. It contains fines that bind the stone together, so it forms a firm, stable pad under patios, driveways, and walkways. Crushed limestone base works in the same role and is a solid alternative where you want a limestone-driven base mix.

For drainage around the patio edge or under a retaining wall, #57 limestone lets water pass through quickly. If you need a finer washed stone for pipe bedding or a thin topping layer, 3/8 inch crushed stone is the right size. Use this table to match the material to the job:

Each of these materials is available by the ton, and you can order exactly what your patio project requires.

Ground and Conditions in Dalhart

The soil story in Dallam County is about expansive clay. This clay shrinks and swells with the season, which is why base depth and drainage carry the job. A thin base over clay will crack and settle as the ground moves beneath it. The fix is to excavate deep enough, lay a compacted Flex Base layer at the right depth, and give water a way out so it does not soften the clay below.

Heavy downpours and flash flooding are the water events that test a base job here. When rain comes hard and fast, a patio without proper drainage will hold water at its edge, and that moisture works its way under the base. A gravel trench or a layer of #57 limestone around the patio perimeter moves that water away before it can cause trouble.

Work runs year round in most of Texas; wet spells, not cold, are what stop a base job. Frost is minimal in most of the state, and base failures here come from water and clay movement, not frost. So plan your patio for the dry season, compact each lift of base properly, and you can build any month the ground is dry enough to work.

Delivery to Dalhart and the Surrounding Area

Ordering bulk material for a Dalhart project starts with figuring out how much you need, then choosing between tons and yards. For a patio base, measure the square footage and multiply by the compacted depth you plan to use. That gives you a volume in cubic yards, which we convert to tons based on the material weight. If you are unsure, the product page for each material includes quantity guidance.

Texas Rock Supply delivers across Dallam County, including to Kerrick and Texline. When your load arrives, you will need a place for the driver to dump, either on a clean driveway or into a spot you have marked. For a patio job, many customers have the base dumped near the work area so they can spread it with a skid steer or by hand as they build.

Ordering online is straightforward. Pick your material, enter the quantity in tons, and schedule your delivery window. The driver brings the load on a dump truck, and you are ready to start spreading and compacting the same day.

Start Your Dalhart Project With the Right Base

A patio that lasts starts with the right bedding and base materials, delivered to your site in Dalhart. Use the quantity calculator on each product page to estimate your tonnage, then place your order online. Texas Rock Supply will bring the Flex Base, stone screenings, or drainage stone you need, sized to your project and ready to spread.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Dalhart, TX

What gravel is best for a driveway in Dalhart?

Flex Base is the best choice for a driveway in Dalhart. It binds together when compacted, so it forms a firm surface that holds up under vehicle traffic. Spread it in lifts and compact each one for a stable drive. For a top layer that is easier on tires, you can add a finer crushed stone over the base.

How much material will my project need?

Measure the length and width of your project area in feet, then multiply by the depth in feet to get cubic feet. Divide by 27 to convert to cubic yards. Most base materials weigh about 1.4 tons per cubic yard, so multiply your cubic yards by that number to estimate tons. When in doubt, order a little extra to account for compaction.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.