Washed Sand for Patios in Barry, TX

Planning a patio job in Barry, TX? You need gravel and aggregate delivery in Barry, TX that shows up on time and sized right. Texas Rock Supply delivers bulk Flex Base and washed stone for the Blackland Prairie, where expansive clay means your base and bedding layers carry the whole job.

Materials for Barry Projects

For paver patios and flatwork in Barry, the bedding layer is where the work lives. Start with a compacted base of Flex Base. It locks up tight and gives your pavers a stable platform that does not shift under foot traffic or patio furniture.

On top of that base, 3/8 inch crushed stone works as a leveling course for pavers. This fine crushed limestone spreads evenly and screeds flat without the gaps you get with larger stone. For a slightly different bedding feel, stone screenings pack into paver joints and hold flagstones firm.

Around the patio edge, #57 limestone handles drainage behind retaining walls and under the base layer. If you are building a dry creek bed or a border to direct runoff away from the slab, Texas River Rock gives you a clean decorative finish that stays put.

Ground and Conditions in Barry

Expansive clay across the Blackland Prairie and much of north and central Texas shrinks and swells with the season, which is why base depth and drainage carry the job. A thin base over that clay will heave and crack your patio within a year or two.

Heavy downpours and flash flooding are the real test here. Water that sits under your pavers softens the clay and starts the whole slab moving. A proper base depth of 4 to 6 inches of Flex Base, compacted in lifts, gives water a path out and keeps your bedding layer dry.

Work runs year round in most of Texas; wet spells, not cold, are what stop a base job. Frost depth is minimal in most of the state, so base failures here come from water and clay movement, not frost. Time your pour between rain events and you can lay a patio any month of the year.

Delivery to Barry and the Surrounding Area

Ordering bulk material for a Barry job starts with figuring out whether you need tons or yards. For a bedding layer, measure your patio square footage and multiply by the depth you plan to screed. Most paver beds need about 1 inch of 3/8 inch crushed stone after compaction, so a 10 by 12 foot patio takes roughly half a ton.

Texas Rock Supply delivers by the ton, sized to your project, right to your site in Navarro County. We serve Barry and the surrounding area including Blooming Grove, Chatfield, Corsicana, Dawson and Frost. Order online and schedule your drop so the material lands when your crew is ready to spread it.

What gravel is best for a driveway in Barry?

For a driveway in Barry, start with a compacted layer of Flex Base at 4 to 6 inches deep. It locks together under vehicle weight and handles the clay movement common across the Blackland Prairie. Top it with driveway gravel or #57 limestone for a cleaner surface that sheds water.

How much material will my project need?

Measure your project area in square feet and multiply by the depth in inches, then divide by 324 for tons. A 12 by 20 foot patio with a 1 inch bedding layer needs about 0.74 tons of 3/8 inch crushed stone. For the Flex Base underneath at 5 inches, plan on roughly 3.7 tons. Order a little extra for compaction loss and low spots.

Order Your Barry Patio Materials Today

Use the material calculator on each product page to dial in your quantity before you order. Once you know your tonnage, place your order online and Texas Rock Supply will get your Flex Base and 3/8 inch crushed stone scheduled for delivery in Barry. Get the bedding right and your patio will stay level for decades.