Skip to main content
FREE Delivery!|(512) 412-3378

Runnels County, Texas ยท Free Delivery

Bulk Gravel Delivery to Ballinger, TX

Free delivery to Ballinger on every order, with loads arriving in as fast as 2 business days.

Delivering to Ballinger, TX

Free delivery on every order.

  • Free delivery to Ballinger
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Ballinger

Crushed gravel and base materials that compact under tires.

Flex Base

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Ballinger

Rock & Stone delivered to Ballinger

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Ballinger

Decorative delivered to Ballinger

Rounded stone for beds, borders and water features.

Sand delivered to Ballinger

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Ballinger

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Ballinger

How delivery to Ballinger works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Ballinger.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Ballinger addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

If you are laying a patio in Ballinger, TX, you need gravel and aggregate delivery that shows up on time and speced right. Texas Rock Supply brings bulk material straight to your job, from Flex Base for the subgrade to the bedding stone under your pavers. The local clay moves with moisture, so what goes under the flatwork matters as much as the pavers themselves.

Materials for Ballinger Projects

Start a patio job with a sound base. Flex Base compacts into a firm slab that holds up under foot traffic and furniture. Spread it at a minimum depth of 4 inches, wet it down, and run a plate compactor over it until it stops moving.

For the bedding layer that your pavers sit in, use stone screenings. This fine, crushed limestone locks together and screeds level, giving each paver full support without a gap underneath. Set your edge restraints first, then spread screenings to a consistent 1 inch depth before laying the pavers.

Do not forget the sand for sweeping into the joints after the pavers are down. Mason sand is clean and sharp, so it locks the pavers together and keeps them from shifting underfoot.

Ground and Conditions in Ballinger

Expansive clay across the Blackland Prairie shrinks and swells with the season, and that movement is what cracks a thin patio slab. A base that is too shallow lets the clay push up through the joints and heave your flatwork out of level by midsummer.

The fix is depth and drainage. A full 6 inches of compacted Flex Base spreads the load and bridges the small clay shifts underneath. Adding a layer of 3/4 inch crushed stone below the base gives water a path out from under the patio instead of letting it soften the clay.

Work runs year round in most of Texas; wet spells, not cold, are what stop a base job. Heavy downpours and flash flooding can turn a half-built patio into a mud pit, so check the forecast and keep a roll of plastic on hand to cover fresh base before a storm rolls through.

Frost depth is minimal in most of the state, so base failures here come from water and clay movement, not frost. You do not need to dig below a frost line like they do up north. You need to make sure water drains away from the patio and the base is thick enough to carry the load.

Delivery to Ballinger and the Surrounding Area

Ordering bulk material for a Ballinger job starts with a quick estimate. Figure the square footage of your patio and multiply by the depth in feet, then divide by 27 to get cubic yards. A 10 by 12 foot patio with a 4 inch base needs about 1.5 yards of Flex Base, plus another half yard of screenings for bedding.

Tell us whether you want material by the ton or by the yard when you order online. We deliver to job sites across Runnels County, including nearby Miles, Norton, Rowena, and Winters. Let us know if the driver can back up to the work area or if you will be moving material by wheelbarrow, and we will size the load to match.

Bulk delivery means the material shows up in a pile, not in bags. Have a level spot cleared where the driver can dump, and keep the path from the pile to the patio clear so you can move material without fighting the terrain.

What gravel is best for a driveway in Ballinger?

For a new driveway, start with Flex Base compacted in lifts. It locks into a firm surface that handles truck traffic and sheds water. Top it with driveway gravel for a cleaner look and better traction. On an existing drive, a fresh layer of 3/4 inch crushed stone over the packed base keeps the surface stable through wet spells.

How much material will my project need?

Measure the length and width of the area in feet, multiply by the depth in feet, then divide by 27. That gives you cubic yards. A 20 by 30 foot patio at 4 inches deep takes about 7.5 yards of base. Add 10 percent for compaction and settling. When you order, we can help you confirm the quantity before we load the truck.

Order Bulk Material for Your Ballinger Project

Use the calculator on our site to check your yardage, then place your order for delivery in Ballinger. We will get the right material to your job in Runnels County, whether you are bedding pavers, topping a drive, or fixing a drainage run. Call Texas Rock Supply today and set up your delivery.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Ballinger, TX

What gravel is best for a driveway in Ballinger?

For a new driveway, start with Flex Base compacted in lifts. It locks into a firm surface that handles truck traffic and sheds water. Top it with driveway gravel for a cleaner look and better traction. On an existing drive, a fresh layer of 3/4 inch crushed stone over the packed base keeps the surface stable through wet spells.

How much material will my project need?

Measure the length and width of the area in feet, multiply by the depth in feet, then divide by 27. That gives you cubic yards. A 20 by 30 foot patio at 4 inches deep takes about 7.5 yards of base. Add 10 percent for compaction and settling. When you order, we can help you confirm the quantity before we load the truck.

What access does the truck need at my Ballinger address?

A clear, level spot the truck can reach and tip in, with nothing parked in the way and no low branches or wires over the approach. If the drop is behind a gate, tell us the width when you order. Soft ground after rain is the usual reason a delivery in Ballinger has to be moved, so point out anywhere the truck should not drive.

Washed Sand and Washed Stone in Ballinger, TX