Order Flex Base and Crushed Stone in Crosby County, TX
Looking for gravel, stone and aggregate delivery in Crosby County, TX? Texas Rock Supply delivers Flex Base, crushed limestone, sand and soil straight to your job site. Flex Base is the default base material for Texas driveways and pads, and it is specified locally under TxDOT Item 247 by type and grade, with Grade 1 and Grade 2 as the common commercial grades. Order online and we handle the rest.
Materials Delivered in Crosby County
We deliver bulk materials sized by the ton or cubic yard, so you order exactly what your project needs. Here is what works best across Crosby County, with the local names you will hear from contractors and ranchers.
Flex Base is the workhorse for this area. It is a crushed limestone product that compacts into a dense, load-bearing layer. Most driveways and ranch roads start with a base of Flex Base, then get a surface layer of Driveway Gravel or 3/4" Crushed Stone on top.
Ground Conditions Across Crosby County
Expansive clay across the Blackland Prairie shrinks and swells with the season, which is why base depth and drainage carry the job. When wet clay moves, an under-built base will crack and shift. A thicker base of Flex Base spreads the load and resists that movement.
Heavy downpours and flash flooding are the other driver here. Water has to move off your driveway or pad, not sit in it. A crown in the middle of the drive and a drainage layer of Drain Rock or #57 Limestone under the surface keep water from softening the base.
Flash runoff on slopes and creek banks will wash out unprotected soil. Rip Rap along creek banks and stock tank edges holds against that high-intensity rain. Work runs year round in most of Texas; wet spells, not cold, are what stop a base job. Plan your pour or base work around dry stretches.
Frost depth is minimal in most of the state, so base failures here come from water and clay movement, not frost. That means your money goes into base depth and drainage, not frost protection.
Delivery Across Crosby County
Ordering online is simple. Pick your material, enter the quantity in tons or cubic yards, and schedule delivery to Crosbyton, Lorenzo, Ralls or anywhere else in the county. Bulk delivery means the material arrives on a dump truck and is placed where you need it.
To size your load, measure the length and width of the area in feet, then multiply by the depth in feet. Divide by 27 to get cubic yards. For base material, plan on a minimum depth of 2 inches for a light surface, and 4 to 6 inches for a driveway that sees trucks or heavy equipment.
The calculator on each product page does the math for you. If you are unsure, order a little extra. It is easier to have material left over than to run short mid-project.
Choosing the Right Material
The right base and drainage choice shifts across Texas because the ground changes. In Culberson County in West Texas, the ground is rocky and drains fast, so a thinner base works and the focus is on compaction. In Dallam County in the Panhandle, colder winters and different soil mean you build for stability and use a well-graded base that locks together. Here in Crosby County on the Blackland Prairie, expansive clay is the problem, so base depth and drainage carry the job.
For a driveway, start with Flex Base compacted in layers, then top with Walkway Gravel or 3/4" Crushed Stone for a firmer surface. For a drain or French drain, use a washed stone like #57 Limestone or #67 Stone that water can pass through. For a patio or walkway, Stone Screenings make a smooth, level bed for pavers or flagstone.
Order Flex Base for Your Project Today
Flex Base is the right start for most Crosby County projects. It handles the clay movement, drains well and gives you a firm, long-lasting surface. Order your Flex Base online today and we will deliver it to your site, sized to the ton or yard for your exact job.